I finally found a solution for the jumpbutton when it doesn't work anymore. Many have the problem that the jump button, especially in Jump and Run games suddenly no longer works. I have tried countless settings but nothing helped. According to support it was due to Ground Thersehold. I tested everything and found out that whenever I use an action item and I change the gameplay, the jump button goes all of a sudden. So I tested as long as I could to see what the problem was. I simply reset Ground Thesehold with the Action button and since then I never had a problem with the Jump button again. I just put an action button over the jump button and it works fine. Settings for Action Item Important settings Duration 0.001 Appearance Chance 100 Ground Thereshold 0.1 Bounce Force 0.001 UI Action Button Important settings Block touch through :OFF (Jump Button and Action fix Button) Unlimited Use: ON The jump Button and the ACTION FIX BUTTON on the same position (Stick to Edge on or off both) I hope I could help some. Actually, with the solution only a reset of the settings of ground theresehold takes place and that is the reason why the jump button often does not work. Thus, the support would have to make the next update only a revision of the settings for this function.